interlaminar shear strength

Ambitious attempts to improve interlaminar shear strength have been made by Mueller Prosen and by Keogh.

米勒·普罗森还有基奥都对提高层间切变强度作了大胆的尝试.

Increasing the temperature of preheating, the mandrel-pressure roller and the hot air gun and choosing the moderate pressure of pressure roller come along with a rise in interlaminar shear strength ( ILSS) and a reduction in resin content.

结果表明：提高芯模压力辊温度、热风枪温度、预热器温度，选择适中的压力辊压力，在层间剪切强度提高的同时，树脂含量下降。

Indirect Methods: To measure the interface bond strength include the interlaminar shear strength test.

测量界面粘结强度的间接方法包括层间剪切强度试验.

Aiming at anti-slide performance and anti-seepage performance in pavement performance we measured the texture depth and water permeability coefficient. Finally, we researched on interlaminar shear strength between the micro surfacing and pavement using the determined gradation and the optimum emulsified asphalt content.

路用性能测试主要针对抗滑性能和防渗水性能进行了构造深度和渗水系数的测定。最后，采用确定的级配和最佳改性乳化沥青用量，研究微表处与原路面的层间剪切性能。

This paper aimed at acquiring the real interlaminar shear strength in tension test.

在拉伸负荷方式下，层间剪切强度的测定受弯曲力矩的影响。